Deck Day 17

Looks like the board we need to replace isn't a standard size. No problem because we have the tools! 

So we bought a standard size 2x10 board and cut it down from 8 ft to 51 in. We then ran it through the table saw to reduce its width down to 7 and 3/4 in. Finally we use the new router to put a bullnose on both sides. Now it's ready to be painted.

 Michelle has been in the back painting boards all day. Today she put the first coat of paint on the board she put primer on yesterday. Will primer the board I just cut later today or early tomorrow.